Preparing your pool for Summer

Doing it the right way can mean the difference between a summer of fun and a summer of headaches! Follow these important (and easy) steps to ensure a smooth, carefree pool opening in the spring. And remember, your local BioGuard Dealer is always ready to assist with information tailored to your specific pool care needs.

1.  Remove pool cover (skip this step for pools not using covers)

Drain off any accumulated water on the cover away from your pool. Once removed, clean cover and store in a dry place, free of debris and protected from the sun and weather.

2.  Top up your pool

Your pool should be filled to the middle of the skimmer / weir opening to allow for proper circulation.

3.  Check your pump, skimmer basket & filter

4.  Get your water tested

Be sure to circulate pool water 24 to 48 hours before taking a water sample. Using a clean plastic container (or better still, one that your dealer provides), scoop about one litre of water from elbow-depth. Seal the container and take it to your BioGuard Dealer for testing and analysis.

BioGuard pioneered the idea of computerized water analysis. We have used our resources to research, develop and refine the science of water analysis. Today, our computerized water analysis system provides accurate results almost instantly. You receive personalized instructions for starting the pool. Help keep your water perfectly balanced by bringing in a water sample at least once every month during the pool season.

5.  Test sanitizer & pH levels

You can test sanitizer and pH levels yourself using the BioGuard Test Strips to check free chlorine, pH levels and Total Alkalinity. Use the following chart to determine proper levels.

Free chlorine residual 1.0 to 3.0 ppm
Total Bromine residual 1.0 to 3.0 ppm
pH 7.4 to 7.6 is ideal range (7.2 -7.6 is acceptable)
Total Alkalinity:
Plaster pools
All other types
80 to 125 ppm
125 to 150 ppm

Calcium Hardness:
Plaster pools
All other types

200 to 275 ppm
175 to 225 ppm


6. Routine maintenance

Routine maintenance is the best way to maintain your pool. And with one of BioGuard’s easy-to- use 3-step pool care programs, it’s as easy as 1-2-3!

Vacation Preparation

While on vacation, debris and bacteria can collect in your pool and upset the water balance. Consider a “vacation plan” to prevent problems so you can come home to a clear pool and not a messy surprise.

  1. Contact your BioGuard Dealer for a vacation maintenance plan. (Your dealer can give you instructions based on your specific BioGuard Programme.)
  2. Clean your pool thoroughly, brushing and vacuuming walls and floors.
  3. Test pool water and make sure it’s properly balanced. Anything that’s out of balance-total alkalinity, pH, calcium hardness-will likely get worse when left unattended.
  4. Run your pump at least eight to twelve hours a day to help prevent algae and bacteria growth.
  5. Upon returning, have your BioGuard Dealer perform a water analysis to ensure that your pool is properly balanced and ready for swimming.

Winter Pool Care

Caring for your pool during Winter is the most important thing you can do to make your spring pool opening as easy as possible.

  • Protecting your pool surfaces and equipment.
  • Keeping water looking its best all winter long.
  • Saving money on extra maintenance when you open your pool.

Whether you completely cover your pool or just reduce maintenance, BioGuard can make winter pool care painless.